For UAV
500m Micro infrared laser lighting module
The Micro infrared laser lighting module for the three major requirements of lightweight, small size, and long effective distance for unmanned aerial vehicle monitoring. It is only the size of a thumb, with a light outlet of only 18.6mm and a weight of less than 50g. There are two effective light filling distances, 500m and 800m.
The smallest and lightest in the world
Intelligent matching, plug and play
Automatic dimming, synchronous zoom
-40 ℃ to+85 ℃ working temperature range
Continuous service life of 50,000 hours
Certified: IEC Class 3B, FDA Class 3B, CE, RoHS, REACH
I. Market Application
This product is developed and designed by 3KM specifically for the needs of unmanned aerial vehicle monitoring and supplementary lighting. It is 27.4mm wide, 18.6mm light outlet, 53.6mm long, less than 50g in weight, with an output power of 2W. The longest effective distance measured can reach 600m. It is currently the smallest and lightest long-distance zoom infrared laser lighting module in the industry.
500m Micro infrared laser lighting night vision monitoring system
It has the characteristics of full intelligence, plug and play, intelligent dimming, autofocus, and other technologies. It has an industrial grade working temperature range of -40 ℃ to+85 ℃, meets the FDA and IEC Class 3B laser safety certification. It adopts the patented technology of micro lens laser homogenization with no light loss, no noise, no vibration, no jitter, and no speckle. The light spot is uniform and the image quality is transparent, which can be called a drone monitoring supplementary light.
On site testing results of a miniature 500m Micro infrared laser lighting module at a distance of 500m
On site testing results of a miniature 500m Micro infrared laser lighting module at a distance of 600m
II. Product Features
1. Intelligent features
Photosensitive automatic dimming, passive dimming and remote background dimming a variety of dimming methods
Intelligent synchronous zoom, and the camera Angle automatically adaptation, intelligent adjustment of light intensity, preset support system, synchronous electric zoom 2.0 ° ~ 70 ° continuous adjustable, perfect adaptation of in market surveillance camera, achieve perfect lighting effect;
Perfectly match monitoring equipment of different brands and models, plug and play, without Angle matching;
The system software can monitor the working state of laser and control it intelligently.
2. Technical Features
The light energy utilization rate is above 90%;
Intelligent temperature control protection, coaxial circulation convection air cooling design, each product all through the design of thermal simulation, body temperature than the environment temperature 5 ℃ to 10 ℃ higher ;
Patented technology of laser homogenization for microlens with no light loss, no noise, no jitter, no vibration and no speckle (3KM-AOT);
Near Angle to long Angle zoom speed up to 2 seconds
III. Technical Parameters
Parameters | Values and Description |
Product ID | K10010284 |
Model | IR-850-500-T |
Effective Distance | ≥500m |
Wavelength | 850±10nm |
Zoom Time | ≤2s |
Consumed Power | ≤11W |
Output Optical Power | 2.0±0.3W |
Illumination Angle | 2°~70°(Continuous zoom) |
| Spot Diameter | φ17.5m(@2°,@500m) |
Working Voltage | DC12V±10% |
Laser Safety Distance | ≥9m(@2°，@Pomax) |
Operating Life | ＞20000H |
Communication Interface | RS-485/UART portTTL(Default: 9600bps) |
Communication Protocol | Pelco_D |
Operating Temperature | -40℃～+85℃ |
Storage Temperature | -50℃～+100℃ |
Profile Dimensions | L*W*H：54*29*39.2mm |
Weight | ≈50g |
Note: the infrared laser illumination module parameters are subject to the quotation scheme, subject to change without prior notice.
IV. Overall Dimensions
V. Interface Definition
VI. Notes
The Infrared Laser Lighting Modules belong to the Class 3B non-visible light laser. While the laser light is on, back-light looking at or observing laser light beam with optical instrument is strictly prohibited.
While the Infrared Laser Lighting Module is on, flammable objects are strictly prohibited within 100cm in front of the lens to prevent fires.
The Infrared Laser Lighting Module should be installed where people could not look at it directly or it should be a long enough distance from where people could look directly. Manufactures should choose the Laser radiation power according to its actual application environment, in order to avoid hurting people's eyes.
Manufactures using our Infrared Laser Lighting Modules should put labels warning of laser radiation.
When device fault occurs, please contact with our qualified maintenance personnel for service rather than disassemble it at your own discretion, otherwise warranty will be end of the moment you disassemble it.
